Japanese  |  English

Set Marker

Simple setup that entails just inserting the metal stamp piece into the holder

This is suited to stamping dates (manufacturing date, etc.) and lot numbers.
The metal stamp pieces can be freely arranged using alphanumeric characters, logo marks and so on.

Specifications

Character dimensions

Type Dimensions (mm)
h w s p l (total length)
2 digits 3 digits 4 digits 5 digits 6 digits 7 digits 8 digits 9 digits 10 digits
Type Ⅰ
(smaller 2mm heigh)
1.0 0.6 1.20 1.8 2.4 4.2 6.0 7.8 9.6 11.4 13.2 15.0 16.8
1.5 0.9 1.25 2.15 3.05 5.2 7.35 9.5 11.65 13.8 15.95 18.1 20.25
2.0 1.2 1.30 2.5 3.7 6.2 8.7 11.2 13.7 16.2 18.7 21.2 23.7
Type Ⅰ 2.5 1.5 1.35 2.85 4.35 7.2 10.05 12.9 15.75 18.6 21.45 24.3 27.15
3.0 1.8 1.40 3.2 5.0 8.2 11.4 14.6 17.8 21.0 24.2 27.4 30.6
3.5 2.1 1.45 3.55 5.65 9.2 12.75 16.3 19.85 23.4 26.95 30.5 34.05
4.0 2.4 1.50 3.9 6.3 10.2 14.1 18.0 21.9 25.8 29.7 33.6 37.5
5.0 3 1.90 4.9 7.9 12.8 17.7 22.6 27.5 32.4 37.3 42.2 47.1
6.0 3.6 2.10 5.7 9.3 15.0 20.7 26.4 32.1 37.8 43.5 49.2 54.9
Type Ⅱ 7.0 4.2 2.00 6.2 10.4 16.6 22.8 29.0 35.2 41.4 47.6 53.8 60.0
8.0 4.8 2.00 6.8 11.6 18.4 25.2 32.0 38.8 45.6 52.4 59.2 66.0

Press stamp holder for flat face

TSM holder by hand punch (S)

Insert window of stamps
7×24.5mm

View drawing

TSM-H holder by hand punch (L)

Insert window of stamps
For typeⅠ 7×45mm
For typeⅡ 10×45mm

View drawing

TSK holder for press machine (S)

Shank diameter
Φ16mm
Insert window of stamps
7×24mm

View drawing

TSS holder for press machine (L)

Shank diameter
For typeⅠ Φ16mm
For typeⅡ Φ25mm
Insert window of stamps
For typeⅠ 7×60mm
For typeⅡ 10×105mm

View drawing

Type Body dimensions(mm)
A B C D E F G H I J K L M N O
Type Ⅰ 35.0 60.0 7.0 Φ16 58.0 30.0 20.0 65.0 50.0 15.0 15.0 32.0 150.0 30.0 50.0
Type Ⅱ 35.0 105.0 10.0 Φ25 63.0 35.0 20.0 87.5 72.5 17.5 17.5 50.0 195.0 35.0 56.0

Roll holder for round face

THR holder

Insert window of stamps
For typeⅠ 7mm×120°
For typeⅡ 10mm×120°

View drawing

Type Body dimensions(mm)
A B C H D F R d
Type Ⅰ 21.0 9.0 7.0 12.5 Φ60 6.0 32.0 Φ20
Type Ⅱ 33.0 10.0 10.0 17.5 Φ80 8.0 45.0 Φ25

Set Marker Stamp

Press type

Type Dimensions for press type (mm)
h (height) A B C D E
Type Ⅰ
(smaller 2mm heigh)
1.0 28.0 8.0 7.0 4.8 1.8
1.5 28.0 8.0 7.0 4.8 2.2
2.0 28.0 8.0 7.0 4.8 2.5
Type Ⅰ 2.5 28.0 8.0 7.0 4.8 2.9
3.0 28.0 8.0 7.0 4.8 3.2
3.5 28.0 8.0 7.0 4.8 3.6
4.0 28.0 8.0 7.0 4.8 3.9
5.0 28.0 8.0 7.0 4.8 4.9
6.0 28.0 8.0 7.0 4.8 5.7
Type Ⅱ 7.0 28.0 11.0 10.0 4.8 6.2
8.0 28.0 11.0 10.0 4.8 6.8

Roll type

Type Dimensions for roll type (mm)
h (height) R1 B C E
Type Ⅰ
(smaller 2mm heigh)
1.0 32.0 8.0 7.0 1.8
1.5 32.0 8.0 7.0 2.2
2.0 32.0 8.0 7.0 2.5
Type Ⅰ 2.5 32.0 8.0 7.0 2.9
3.0 32.0 8.0 7.0 3.2
3.5 32.0 8.0 7.0 3.6
4.0 32.0 8.0 7.0 3.9
5.0 32.0 8.0 7.0 4.9
6.0 32.0 8.0 7.0 5.7
Type Ⅱ 7.0 32.0 11.0 10.0 6.2
8.0 32.0 11.0 10.0 6.8